Ricoh VT1730 6, Press the Enter key again. The memory returns to Memory, Press the Auto Cycle key

OPERATION Group Printing From Different Originals (Memory Mode)

6, Press the Enter key again. The memory returns to Memory 1.

0If you store the number of prints for 6 originals, the memory number returns to 1. It is not necessary to press the Enter key,

7.Set the originals face down on the original table.

0The originals are fed from the bottom of the stack. Make sure that the originalsare set in the correct sequence with the first original (Memory 1) on the bottom.

8.Press the Master Making key. Cheek the image position by making prints with the Proof key.

0If the image position is not correct, adjust it using the Image Position key (See page 24) or the side plate fine adjustment dial (See page 25).

9.Turn on the power switch of the optional tape dispenser.

10.Press the Auto Cycle key.

~The Auto Cycle indicator will light.

Cl In the Auto Cycle mode, printing starts automatically after a trial print is delivered.

11.Press the Print Start key.

O After the last page of each printingset is fed out to the paper delivery table, the tape dispenser drops a strip of paper onto the top of the paper stack if you have the optional tape dispenser. The next group printing cycle begins automatically.

34