Ricoh VT1730 manual “% + G “ Paper misfeed in the paper exit section

When The Misfeed Indicator Lights TROUBLESHOOTING

“:% + G “ Paper misfeed in the paper exit section

1.Remove the misfed paper.

~Open the top cover or paper delivery fence if it is necessary.

2.Press the Reset key.

—To prevent paper misfeed:

#Check the position of the paper delivery rollers. See page 18.

Cl If the exit sensor is dim with paper dust, clean it. See page 41.

~If there is a Iar e solid fill image on the leading edge of the original, set the original so that its lea 3 mg edge becomes the trailing edge. Altemativel , change the Image position and make a margin of more than 5 mm, 1/5” at the lea J ing edge of prints.

IJ Try to change the printing speed.

~When you set a curled paper, mrrect the face curl of the leading edge of the paper as shown below.

-FeedDirection

53