CGTH INSTALLATION, OPERATION AND SERVICE MANUAL
2.Route thermostat wiring between the thermostat and the rear of the heater. Carefully staple the wires so as not to damage them and to produce a professional appearing installation.
3.Connect thermostat wires to the "THERMOSTAT CONNECTION" (See Figure 31) on the rear sur- face of the burner as follows:
A. Using an appropriate crimping tool, install the female terminals (included in accessories bag) on the two wires from the thermostat.
B. Push the female terminals on the male termi- nals. The thermostat terminals are not polarity sensitive.
FIGURE 31: Thermostat Installation Rear View
Thermostat
Connection
Wire from thermostat.
See Thermostat Instructions.
32