CGTH INSTALLATION, OPERATION AND SERVICE MANUAL
Fit fasteners progressively outwards in pairs avoiding gaps over 1.5” (38 mm).
5.With the vent collar on the burner, install the addi- tional vent pipe. Push the plain end of the vent into the silicone gaskets. The connection will fit firmly together. If undue force is required to assemble the parts, first, check the cut length for burrs, second, apply warm soapy water to the silicone gaskets.
FIGURE 29: Vent Clamp
P/N 90506015 |
Storm |
Collar |
Vent Clamp Roof |
30