Prune servers
Your radio stores details of UPnP servers that it has seen via its network connection in its internal memory. If you use the radio at different locations you may find that there are servers listed by the radio that you are no longer interested in. The prune servers functions allows the list to be updated so that only active UPnP severs on the currently connected network are shown when selecting 'Shared Media' from the Music Player menu.
1.Press and hold the Menu button to enter the main Music Player menu.
2.Rotate the Tuning/Select control until 'Prune servers' is highlighted on the display. Press the control.
3.To remove servers that are no longer required rotate the Tuning/Select control until 'YES' is highlighted on the display. Press the control to cause the servers to be removed.
4.If you do not wish to prune servers rotate the Tuning/Select control to highlight 'NO' and press the control to confirm.
Wake On LAN
If you are using a computer as a UPnP server for playing your music files via your radio, you may not wish to keep that computer operating when you are not listening via your radio. If your computer is suitably configured, it can either shut down, or enter a standby or hibernation state when it is not being used.
Your radio can wake up a computer which has shut down using a Wake On LAN command via the network provided that the radio has previously connected to a UPnP server application on that computer. A computer which is not currently active will be shown with a question mark in the list of UPnP servers.
Many computers will not respond to Wake On LAN commands from the radio in all modes, and may require software, device driver, BIOS, hardware or router configuration changes for this function to operate. Failure of a computer to respond to Wake On LAN is not considered a fault of the radio.
Music Player
1
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 46 |
