Disabling alarms
1.To disable an alarm enter the alarm setup menu (see page 53) and rotate the Tuning/Select control until the desired alarm is highlighted on the display. Press the Tuning/Select control.
2.Rotate the Tuning/Select control until the 'Enable:' option is highlighted on the display. Press the control.
3.Rotate the Tuning/Select control to highlight 'Off' and press the control.
4.Rotate the Tuning/Select control until the 'Save' option is highlighted on the display then press the control to save the new setting.
The chosen alarm will now be disabled.
Snooze timer
1.The buzzer or radio alarm can be silenced for 5 minutes by pressing the Tuning/Select/Snooze control. Should you wish for a longer snooze duration this can be extended. Pressing the control again while the radio is snoozed will set the available snooze time to 5, 10, 15 or 30 minutes.
2.While the snooze timer is active the remaining snooze time is shown next to the flashing alarm icon on the clock display.
3.In order to cancel the Snooze timer while the alarm is suspended, press the On/Off button. The display will briefly show an 'Alarm Off' message.
Clock and Alarms
1
3
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 56 |
