Roberts Radio 105 manual Information, Factory reset

Models: 105

1 76
Download 76 pages 44.08 Kb
Page 64
Image 64
Information

Information

Factory reset

If you wish to completely reset your radio to its initial state this may be performed by following this procedure. By performing a factory reset, all user entered settings will be erased.

1.Access the menu for the current mode by pressing the Menu button. Rotate the Tuning/Select control to highlight the 'Main menu' option, then press the control to select.

2.Rotate the Tuning/Select control until 'System settings' is highlighted and then press the control to select.

3.Rotate the Tuning/Select control until 'Factory Reset' is highlighted and then press the control. Rotate the Tuning/Select control and highlight 'YES' to proceed.

If you do not wish to carry out a system reset, highlight 'NO' and then press the control. The display will revert to the previous menu.

4.With 'YES' highlighted, press the Tuning/Select control. The radio will restart as if first plugged in and a full reset will be performed. The preset stations will be erased and your wireless network connection details will be lost. All configuration settings will be restored to their defaults, the clock and alarms will be reset. The radio will then launch the 'Setup wizard'. If you wish to leave the radio in a reset condition, switch off the radio at this point.

In case of malfunction for any reason, reset the product as described above to resume normal operation. It may be necessary in some cases to disconnect the mains power and remove batteries, then reconnect power after 10 seconds.

In case of malfunction due to electrical fast transient (burst), reset the product as above (reconnection of the power source may be required) to resume normal operation.

1

1-4

63

Page 64
Image 64
Roberts Radio 105 manual Information, Factory reset