Roberts Radio 105 manual Display and Audio Brightness control

Models: 105

1 76
Download 76 pages 44.08 Kb
Page 60
Image 60
Display and Audio

Display and Audio

Brightness control

The brightness of the display can be adjusted for when the radio is in Standby and for when it is in use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than the standard setting. There are three brightness levels and an almost off 'night-time' setting.

1.Press the On/Off button to switch on your radio. Access the menu for the current mode by pressing the Menu button.

2.Rotate the Tuning/Select control until 'System settings' is highlighted on the display. Press the control to enter the system settings menu.

Rotate the Tuning/Select control until 'Brightness' is highlighted on the display. Press the control.

3.To adjust the display brightness when the radio is switched on rotate the Tuning/Select control until 'Normal' is highlighted on the display.

To adjust the display brightness when the radio is in standby rotate the Tuning/Select control until 'Standby' is highlighted.

Press the control to enter the selected brightness adjustment mode.

4.To adjust the brightness level rotate the Tuning/Select control clockwise to increase the brightness level and anti-clockwise to decrease it.

The backlight level will change as the control is rotated so that you can see the effect of each setting. Note that the backlight is almost completely off at the zero setting. Press the control to set the level.

Press the Menu/Back button to exit.

When the radio is in Standby mode, pressing a button or turning the rotary control will cause the radio to switch to the Normal brightness level for a few seconds. This is so that even if the Standby brightness level is set to zero, it is still possible to see the time by quickly pressing a button.

1

1,4

2-4

59

Page 60
Image 60
Roberts Radio 105 manual Display and Audio Brightness control