Roberts Radio 105 manual Setting the alarm clock

Models: 105

1 76
Download 76 pages 44.08 Kb
Page 54
Image 54
Setting the alarm clock

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to either the radio or a buzzer alarm. In the event of a power interruption your radio has a built in memory that will retain your alarm settings.

Ensure that the time is set correctly before setting the alarms. Alarms cannot be used when running on batteries as the clock is reset from the internet and does not run in battery mode.

1.With your radio switched on, press and hold the Menu button to access the menu for the current mode. Rotate the Tuning/Select control until 'Main menu' is highlighted on the display. Press the control to enter the 'Main menu'.

2.Rotate the Tuning/Select control until 'Alarms' is selected on the display. Press the control to see the current alarm settings. If no change is required, press the Menu/Back button to exit.

3.Rotate the Tuning/Select control until the desired alarm (1 or 2) is highlighted on the display. Press the control to enter alarm setup.

4.Rotate the Tuning/Select control until 'Time' is highlighted on the display. Press the control to adjust the alarm time.

5.Rotate the Tuning/Select control to choose the alarm hour. Press the control to confirm the setting.

6.Rotate the Tuning/Select control to choose the alarm minute. Press the control to confirm the setting. The display will then return to the alarm setting menu.

If the radio has been set to use a 12 hour clock format, there will also be an option here for setting AM or PM for the alarm time.

1,2

1-6

53

Page 54
Image 54
Roberts Radio 105 manual Setting the alarm clock