Sleep timer

Your radio can be set to turn off after a preset time has elapsed. The sleep timer setting can be adjusted between 15 and 120 minutes in 15 minute increments.

1.Press the On/Off button to switch on your radio.

2.Access the menu for the current mode, press and hold the Menu button. Rotate the Tuning/Select control until 'Main menu' is highlighted on the display. Press the control to enter the 'Main menu'.

3.Rotate the Tuning/Select control until 'Sleep' is highlighted on the display then press the Tuning/Select control.

4.Rotate the Tuning/Select control until the required sleep time setting is selected. Press the Tuning/Select control to confirm the setting. The sleep timer can be set to between 15 and 120 minutes, or to Off.

5.Your radio will switch into standby mode after the preset time has elapsed. If running on batteries it will switch off completely shortly afterwards.

An active sleep timer is shown using a small timer indicator at the bottom of the playing displays. This indicator also shows the sleep time remaining before the radio switches itself into standby mode.

6.To cancel the sleep time before the preset time has elapsed and to turn off the radio, press the On/Off button to turn the radio off manually.

To cancel the sleep timer and leave the radio playing, go back into the sleep timer settings (steps 1 to 4 above) and select the Off option in step 4.Alternatively, simply press the On/Off button twice in succession to cancel the timer and switch the radio back on again.

Clock and Alarms

1,6

2

2-4

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

58

Page 59
Image 59
Roberts Radio 105 manual Sleep timer