Cassette Tapes

High quality 90 min (C90) tapes are recommended for use in your cassette recorder. In tests these provide a balance between maximum recording time and prolonged tape life. Audio cassette tapes are available up to 120 minutes in length, however the tape material is thin and may stretch or break during recording or playback and are not recommended for use with your cassette recorder.

Using the AC adaptor

Insert the adaptor plug into the DC socket on the right side of your cassette recorder. Plug the adaptor into a standard 13A mains socket outlet. Whenever the adaptor is used the batteries are automatically disconnected.

The AC adaptor should be disconnected from the mains supply and your cassette recorder when not in use.

We would recommend for economy that the C9950 be used via an AC adaptor whenever possible with battery operation for occasional or stand-by use only.

Using headphones (not included)

Headphones or earphones for use with your C9950 should be stereo and fitted with a 3.5mm stereo jack plug. Insert the headphone plug into the

socket located on the front left side of your cassette recorder. When

the headphones are plugged in the loudspeaker is automatically disconnected.

If you need any further advice, please call our Technical Helpline on

6

0208 758 0338 (Mon-Fri)

Page 7
Image 7
Roberts Radio C9950 manual Cassette Tapes, Using the AC adaptor, Using headphones not included