Alarms

Your clock radio has four separate alarms which can be set to wake you to radio (DAB, FM) or buzzer alarm. Each alarm can be set to sound once, daily, on weekdays or at weekends. The alarms can be set whether the clock radio is on or in standby mode. In the event of a power interruption your clock radio has a built in memory chip that will maintain all your alarm settings for when the power is restored.

Note: If no buttons are pressed for 5 seconds, the radio will exit the alarm setup.

Note: Alarm times are set using the 24Hr format e.g. 2:30PM is entered as 14:30.

Setting an alarm

1.

Press and release the Alarm button. "Set alarm" will show on the

 

display. Press the Select button the alarm status will show on the

 

display.

2.

Repeatedly press and release the TuningUp/Downbuttonsto choose

 

the desired alarm 1-4 and then press the Select button. The alarm

 

hour will be highlighted.

1

2-4

2-4

3.

Repeatedly press and release the TuningUp/Downbuttonsto choose

 

the desired hour for the alarm and then press the Select button. The

 

alarm minute will be highlighted.

4.

Repeatedly press and release the TuningUp/Downbuttonsto choose

 

the desired minute for the alarm and then press the Select button.

 

The alarm source will be highlighted.

2-4

19

Page 20
Image 20
Roberts Radio ecologic 6 manual Alarms, Setting an alarm, Hour will be highlighted, Alarm minute will be highlighted