To cancel the alarm | Roberts Radio ecologic 6 specification

11.Press the Tuning Up/Down button to select the correct day and then press the Select button to conﬁ rm the setting.

12.The alarmhasnowbeensetandtheradiowillreverttothepreviousradio display mode. The alarm symbol (bell) will appear on the display.

When the alarm is set to wake by radio, the last used station will be switched on at the alarm time.

11

While the alarm is sounding, normal radio controls are not available. The alarm indicator (bell) will ﬂ ash.

If the buzzer alarm is used, the volume will start from minimum and increase in level every few seconds. The alarm will sound for 60 minutes unless cancelled.

To cancel the alarm

1.While an alarm is sounding it can be cancelled by pressing the On/Off button. The alarm will then be rescheduled as needed according to its settings.

11

11

Note: Pressing the On/Off button once during a radio alarm cancels the alarm but allows the radio to continue playing. Pressing the On/Off button a second time will put the radio back into standby mode.

1

21

Image 22

Roberts Radio ecologic 6 manual To cancel the alarm

Contents

Roberts Contents Dimmer button Alarm button Controls front view Controls rear Using the clock radio for the ﬁrst time Selecting a station DAB Above procedure Presetting stations DAB and FMRepeat this procedure for the remaining presets Number in which you wish to store the chosen station Recalling a preset Finding new stations DAB Manual tuning DAB Secondary services DAB Display modes DAB Current station belongs Default is Dynamic Range Control DRC settings DABPress the Tuning Up/Down button until the display shows DRC Order Alphanumeric Station order setup DABFavourite stations Active station Signal strength display DAB Prune stations DAB Operating your radio Search tuning FM Manual tuning FM Display modes FM Stereo / Mono setting FM Auto preset stations FM Alarm minute will be highlighted AlarmsSetting an alarm Alarm source will be highlighted Weekends Then press the Select button to conﬁ rm the settingDay options as described below To cancel the alarm To switch the alarm on or off To view set alarm times Appear on the display SnoozeTo set the snooze time Will show on the display Sleep function Setting the clock manually To return to auto clock set mode Dual mode dimmer backlight Software version System reset Auxiliary input socket To the Auxiliary input socket Headphone socket General 174.928 239.200MHz Speciﬁcations Circuit featuresHeadphone socket 5mm dia 87.50 108 MHz Aux in socket 5mm diaPage Guarantee Worton Road Isleworth Middlesex Technical Helpline 020 8758 0338 Mon-Fri during ofﬁ ce hours