Auto preset stations - FM
Your clock radio will scan the entire FM band searching for stations. As stations are found, they are stored in your clock radio preset memory locations.
1. Press the On/Off button to switch on your radio.
2. If needed, press the Band button to select the FM band.
3. Press and hold the Menu/Info button until the display shows "Mono override" on the lower line.
4.Press and release the Tuning Up/Down buttons until the display shows "FM Scan".
5. Press the Select button to confi rm the scan.
Note: Some of the FM stations stored may be quite weak as the scan stores stations regardless of their signal strength. Up to ten stations
1
2
3
will be stored. Presets can be modifi ed as needed using the procedure | 4 | 4 |
|
described on page 6.
5
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
18
