To switch the alarm on or off | Roberts Radio ecologic 6 specs

To switch the alarm on or off

1.	Press and release the Alarm button, "Set alarm" will show on the
	display.
2.	Repeatedly press and release the Tuning Up/Down button until
	"Alarm On/Off" shows on the display.

1

3.	Press the Select button to enter alarm status setup.
4.	Repeatedly press and release the Tuning Up/Down button until the
	desired alarm 1-4 is displayed.

2,4

2,4

5.	To disable a set alarm press the Select button and the alarm symbol
	(bell) will be removed from the display. The alarm will be cancelled.
6.	To enable the set alarm press the Select button until the alarm symbol
	(bell) shows on the display. The alarm will now activate at the set
	time.

To view set alarm times

1.Press the Alarm button, then press the Select button to enter alarm setup.

2.Repeatedly press and release the Tuning Up/Down button to view the current alarm settings.

3,5,6

1

1

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

2

2

22

Image 23

Roberts Radio ecologic 6 manual To switch the alarm on or off, To view set alarm times

Contents

Roberts Contents Controls front view Dimmer button Alarm button Controls rear Using the clock radio for the ﬁrst time Selecting a station DAB Number in which you wish to store the chosen station Presetting stations DAB and FMRepeat this procedure for the remaining presets Above procedure Recalling a preset Finding new stations DAB Secondary services DAB Manual tuning DAB Current station belongs Display modes DAB Order Dynamic Range Control DRC settings DABPress the Tuning Up/Down button until the display shows DRC Default is Active station Station order setup DABFavourite stations Alphanumeric Prune stations DAB Signal strength display DAB Operating your radio Search tuning FM Manual tuning FM Display modes FM Stereo / Mono setting FM Auto preset stations FM Alarm source will be highlighted AlarmsSetting an alarm Alarm minute will be highlighted Day options as described below Then press the Select button to conﬁ rm the settingWeekends To cancel the alarm To view set alarm times To switch the alarm on or off Will show on the display SnoozeTo set the snooze time Appear on the display Sleep function Setting the clock manually To return to auto clock set mode Software version Dual mode dimmer backlight System reset To the Auxiliary input socket Auxiliary input socket Headphone socket General 87.50 108 MHz Aux in socket 5mm dia Speciﬁcations Circuit featuresHeadphone socket 5mm dia 174.928 239.200MHzPage Guarantee Technical Helpline 020 8758 0338 Mon-Fri during ofﬁ ce hours Worton Road Isleworth Middlesex