Dynamic Range Control (DRC) - DAB
Dynamic range control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default) DRC 1 Maximum compression applied. DRC 1/2 Medium compression applied.
1.Press the On / Off button to switch on your radio.
2.Press and release the Band button until the DAB band is selected.
3.Press and hold the Info button.
4.Press the Tuning Up or Down buttons until 'DRC Value' appears on the display. Press and release the Select button. The display will show the current DRC value.
5.Press the Tuning Up or Down buttons to select the required DRC setting (default is 0) .
6.Press and release the Select button to confirm the setting. The display will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC, then the DRC setting in the radio will have no effect.
2
3
4,5 4,5
4,6 
If you need any further advice, please call our Technical Helpline on :- | 12 |
020 8758 0338 |
