Using an SD memory card with your radio

This section describes how to use your radio to access and playback your audio files via Secure Digital (SD, SDHC) cards. The RecordR can also record DAB or FM radio stations to SD, SDHC media.

The RecordR has been tested with a wide range of SD/SDHC cards from 512MB to 32GB capacity. Note that cards of less than 512MB capacity cannot be used. SD/SDHC memory must be formatted to use the FAT 16 or FAT 32 filing system in order to operate in the radio.

Please note that there are many different card variants available and it is not possible to guarantee that all cards will work in the RecordR. In the event that a particular card is not recognised, please try an alternative brand or capacity.

Audio formats supported for playback are MP3, WMA, WAV and AAC. Playback does not support files encoded using WMAlossless, WMAVoice, WMA 10 professional, nor files of any format which have DRM protection. For more details see 'Audio formats' page 44.

The SD card slot is located on the left hand side of the radio.

Cautions:

To avoid possible damage to files on your SD card, place the unit in Standby mode before inserting and removing your SD card.

Inserting and removing SD cards

1.To insert an SD card into your radio push the card label side facing towards you and gold contacts first into the card slot on the left hand side of your radio until it clicks.

To remove the card push the card in so that it clicks once more. It will then be pushed out slightly allowing removal.

1

21

Page 22
Image 22
Roberts Radio RecordR manual Using an SD memory card with your radio, Inserting and removing SD cards