Roberts Radio RecordR manual Scan sensitivity setting - FM, 2 3 4,5 4,5 4,6

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough to give good reception. However, you may wish the Auto-scan function to also be able to find weaker signals, possibly from more distant radio transmitters. Your radio includes a local / distant option for the Auto-scan function.

1.Press the On / Off button to switch on the radio.

2.Press and release the Band button until the FM band is selected.

3.Press and hold the Info button.

4.Press the Tuning Up or Down buttons until 'Scan sensitivity' appears on the display. Press and release the Select button.

5.Press the Tuning Up or Down buttons to switch between Local and Distant options on the lower line of the display. The Distant option will allow the radio to find weaker signals when scanning.

6.Press and release the Select button to confirm your selection. The radio will then revert to the normal information display. The Local or Distant setting is stored in the radio and remains in force until changed or until a System Reset.

Note: The initial setting (out of the box, or after a System Reset) causes the radio to ignore weaker (or more distant) signals.

2

3

4,5 4,5

4,6

17