MOUNTING LOCATION S

The mounting location and position of your amplifier will have a great effect on its ability to dissipate the heat generated under normal operation. The design of our cast aluminum heatsink serves to easily dissipate the heat generated over a wide range of operating conditions. However, to maximize the performance of your amplifier, care should be taken to ensure adequate ventilation.

Trunk Mounting

Mounting the amplifier vertically on a surface with the fin grooves running up and down will provide the best cooling of the amplifier.

Mounting the amplifier on the floor of the trunk will work but provides less cooling capability than vertical mounting.

Mounting the amplifier upside down to the rear deck of the trunk will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

Passenger Compartment Mounting

Mounting the amplifier in the passenger compartment will work as long as you provide a sufficient amount of air for the amplifier to cool itself. If you are going to mount the amplifier under the seat of the vehicle, you must have at least 1" (2.54cm) of air gap around the amplifier's heatsink.

Mounting the amplifier with less than 1" (2.54cm) of air gap around the heatsink in the passenger compartment will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

Engine Compartment Mounting

Rockford Fosgate amplifiers should never be mounted in the engine compartment. Not only will this void your warranty but could create an embarrassing situation caused by the ridicule from your friends.

BATTERY AND CHARGING

Amplifiers will put an increased load on the vehicle's battery and charging system. We recommend checking your alternator and battery condition to ensure that the electrical system has enough capacity to handle the increased load of your stereo system. Stock electrical systems which are in good condition should be able to handle the extra load of any Rockford amplifier without problems, although battery and alternator life can be reduced slightly. To maximize the performance of your Rockford Fosgate amplifier, we suggest the use of a heavy duty battery and an energy storage capacitor.

NOTE: These amplifiers utilize a large array of power supply capacitance and can draw substantial current at turn- on. The dashboard BATTERY VOLTAGE and/or ALTERNATOR CHARGE lamp may illuminate for a brief period while momentarily recharging the capacitor bank. This may be most noticeable when the amplifier is off for at least a day or two and is considered normal operation.

– 10 –

Page 12 Page 14
Page 13
Image 13
Rockford Fosgate 250.2 manual Mounting Location S, Battery and Charging
Page 12 Page 14

250.2 specifications

The Rockford Fosgate 250.2 is a powerful and versatile car amplifier known for its performance and reliability. As part of Rockford Fosgate’s renowned line of audio equipment, the 250.2 is engineered to enhance the listening experience in vehicles, providing a fantastic balance of power, clarity, and durability.

This amplifier delivers an impressive 250 watts of power, making it suitable for both beginner audiophiles and seasoned enthusiasts who seek to elevate their car audio system. The 250.2 is a two-channel amplifier, which means it can power two speakers or one subwoofer. Utilizing a class A/B topology, it ensures high efficiency while minimizing distortion, resulting in clean and powerful audio output.

One of the standout features of the Rockford Fosgate 250.2 is its Signal Sense turn-on technology. This feature allows the amplifier to automatically turn on when it detects a signal from the head unit, eliminating the need for a manual switch. Additionally, the built-in remote gain control allows users to adjust the amplifier’s output level easily, providing a customizable audio experience tailored to their preferences.

The 250.2 is equipped with an adjustable crossover that can be set to high-pass, low-pass, or full-range modes. This flexibility permits users to fine-tune the frequencies sent to their speakers, optimizing sound quality and performance. Further enhancing its capabilities, the amplifier also includes built-in variable bass boost that allows users to amplify low frequencies for a more impactful bass response.

Constructed with a durable aluminum heatsink, the Rockford Fosgate 250.2 maintains optimal temperature during operation, ensuring long-lasting performance and minimizing thermal issues. The amplifier also features RCA inputs, making it compatible with a wide range of audio sources, enhancing its versatility for various setups.

In summary, the Rockford Fosgate 250.2 is a reliable and robust car amplifier that combines high power output with advanced technologies and user-friendly features. Its efficient design, customizable settings, and quality construction make it an excellent choice for anyone looking to improve their vehicle's sound system. Whether for day-to-day driving or road trips, the Rockford Fosgate 250.2 provides an audio experience that is both powerful and enjoyable, reinforcing Rockford Fosgate's reputation as a leader in the car audio industry.
Top Page Image Contents