INSTALLATION CONSIDERATIONS

Tools Needed

The following is a list of tools you will need for installing the “250 Series” Power amplifiers:

Allen wrenches 9/64" & 3/32" (included)

Wire Cutters

Wire strippers

Voltmeter

Battery post wrench

Wire crimpers

Electric hand drill and assorted bits

Assorted connectors

This section focuses on some of the vehicle considerations for installing your new Punch amplifier. Checking your battery and present sound system, as well as pre-planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

Before beginning any installation, be sure to follow these simple rules:

1.Carefully read and understand the instructions before attempting to install the amplifier.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your amplifier in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality Connecting Punch accessories for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides for best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install a fuseholder and fuse on the +12V power wire within 18" (45.7cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

– 9 –

Page 11 Page 13
Page 12
Image 12
Rockford Fosgate 250.2 manual Installation Considerations, Tools Needed
Page 11 Page 13

250.2 specifications

The Rockford Fosgate 250.2 is a powerful and versatile car amplifier known for its performance and reliability. As part of Rockford Fosgate’s renowned line of audio equipment, the 250.2 is engineered to enhance the listening experience in vehicles, providing a fantastic balance of power, clarity, and durability.

This amplifier delivers an impressive 250 watts of power, making it suitable for both beginner audiophiles and seasoned enthusiasts who seek to elevate their car audio system. The 250.2 is a two-channel amplifier, which means it can power two speakers or one subwoofer. Utilizing a class A/B topology, it ensures high efficiency while minimizing distortion, resulting in clean and powerful audio output.

One of the standout features of the Rockford Fosgate 250.2 is its Signal Sense turn-on technology. This feature allows the amplifier to automatically turn on when it detects a signal from the head unit, eliminating the need for a manual switch. Additionally, the built-in remote gain control allows users to adjust the amplifier’s output level easily, providing a customizable audio experience tailored to their preferences.

The 250.2 is equipped with an adjustable crossover that can be set to high-pass, low-pass, or full-range modes. This flexibility permits users to fine-tune the frequencies sent to their speakers, optimizing sound quality and performance. Further enhancing its capabilities, the amplifier also includes built-in variable bass boost that allows users to amplify low frequencies for a more impactful bass response.

Constructed with a durable aluminum heatsink, the Rockford Fosgate 250.2 maintains optimal temperature during operation, ensuring long-lasting performance and minimizing thermal issues. The amplifier also features RCA inputs, making it compatible with a wide range of audio sources, enhancing its versatility for various setups.

In summary, the Rockford Fosgate 250.2 is a reliable and robust car amplifier that combines high power output with advanced technologies and user-friendly features. Its efficient design, customizable settings, and quality construction make it an excellent choice for anyone looking to improve their vehicle's sound system. Whether for day-to-day driving or road trips, the Rockford Fosgate 250.2 provides an audio experience that is both powerful and enjoyable, reinforcing Rockford Fosgate's reputation as a leader in the car audio industry.
Top Page Image Contents