Rockford Fosgate manual USING THE 250.2 SIGNAL SWITCHING NETWORK

USING THE 250.2 SIGNAL SWITCHING NETWORK

The Punch 250.2 Power amplifier has a crossover switching network which enables you to:

•“Audiophile Bypass” the 250.2 and Pass-Thru

•Configure a 12dB per octave filter for both 250.2 and Pass-Thru

•“Audiophile Bypass” the 250.2 and configure a 12dB per octave filter for the Pass-Thru

•Configure a 24dB per octave filter for the 250.2 and “Audiophile Bypass” the Pass-Thru

•Configure a 12dB per octave bandpass filter for the 250.2 and “Audiophile Bypass” the Pass-Thru

I

N

S T A L L A T I O N

The crossover switching network allows the crossover to be distributed to the amplifier and Pass Thru in many different configurations. The orientation of both switches configure the distribution pattern to where the crossover signal will be routed.

XCard Options

Amplifier	Pass Thru
XCard 1	XCard 2

AmplifierAmplifier

XCard 1 XCard 2

Audiophile Bypass

Not Used	Not Used
XCard 1	XCard 2

®

250.2 AMPLIFIER

P O W E R

125 Watts X 2 into 4 Ohms

with less than 0.05% THD + N from 20-20kHz

225 Watts X 2 into 2 Ohms

with less than 0.10% THD + N from 20-20kHz

®

ROCKFORD CORPORATION

MADE IN THE USA

*Bridging Note: The Punch 250.2 can be

bridged in many configurations. Refer to your owner's manual to determine which mode will work best in your system.

XCard 2

XCard 1

High-Pass

HP

LP

Low-Pass

LP

HP

Full Range

Audiophile Bypass

Not Used Amp Only Pass Thru

XCard 1 XCard 2

FULL

– 19 –