250.2 SPECIFICATIONS
Dynamic Power Rating |
|
Per channel into a 4Ω load | 180 Watts |
Per channel into a 2Ω load | 310 Watts |
Bridged into a 4Ω load | 620 Watts |
Continuous Power Rating (Competition Standard) - Measured at 13.8 Battery Volts |
|
RMS continuous power per channel, both channels driven |
|
into a 4Ω load from 20 to 20,000Hz with less than | 125 Watts |
0.05% THD (Total Harmonic Distortion) | |
RMS continuous power per channel, both channels driven |
|
into a 2Ω load from | 225 Watts |
RMS continuous power mono, into 4Ω load | 450 Watts |
from | |
Common Mode Rejection Ratio (CMRR): | Typically 40dB |
>100dB | |
Frequency Response: | |
Bandwidth: | |
Damping Factor @ 4Ω (at output connector): | >200 |
Slew Rate: | 50V ms |
IM Distortion (IHF): | <0.05% |
Input Impedance: | 20k Ohms |
Source Unit Compatibility (+15dB Gain Overlap) | 28V max. input |
Input Sensitivity (+0dB Gain Overlap): | Variable from 300mV to 5V |
Variable form 100mV to 960mV | |
B+ Fuse Size: (External to amplifier) | 60 Amp or two 30 Amp |
Fuse Type: | AGU / Maxi Fuse |
Crossover Slope: | 12dB or 24dB/octave Butterworth |
Factory Crossover Frequency: | 80Hz (0.047mf) |
Factory Default Crossover Setting: | Full Range |
Dimensions: (including end caps) | |
| (24.4cm) x (36.27cm) x (6.6cm) |
Specifications subject to change without notice.
– 46 –