Rockford Fosgate 250.2 manual Plifier

10.Input Sensitivity Controls – The input level controls are preset to match the output of most source units. They can be adjusted to match output levels from a variety of source units.

11.Internal Crossovers – These built-in crossover cards are configurable for a multitude of operating frequencies. The orientation of the card in its socket determines its function of high-pass, low-pass or full range operation.

12.E-Z Bridge Switch / 0°-180°Phase Switch – This dual purpose switch enables you to E-Z bridge the amplifier or invert the signal phase of the right channel.

13.Phase Switch – This switch enables you to easily invert the phase of the left channel without having to disconnect the speaker wires.

14.Crossover Switching – These internal switches allow the crossover to be distributed to the amplifier and Pass-Thru in many different configurations.

15.Audiophile Bypass – One of the crossover switching configurations allows the internal crossover circuit to be bypassed, maintaining Audiophile sound quality due to a shorter signal path.

16.LED Power Indicator – The LED gives a visual indication of the status of the amplifier, lighting when the unit is turned on.

XCard	Options
Amplifier			Pass Thru
XCard 1				XCard 2
Amplifier				Amplifier
XCard 1				XCard 2
Audiophile			Bypass
					Not Used
Not Used
XCard 1					XCard 2
	Audiophile			Bypass
					Pass Thru
Not Used		Amp	Only
XCard 1					XCard 2

®

250

AM

PLIFIER

.2

O

W

E

R

P

125 Watts

X 2 into

4 Ohms

THD

+ N from

20-20kHz

than 0.05%

with less

2 Ohms

225 Watts

X 2 into

20-20kHz

THD

+ N from

than 0.10%

with less

®

ROCKFORD

CORPORATION

USA

MADE

IN THE

Note:

The Punch

250.2

can be

*Bridging

. Refer to your

bridged

in many

configurations

mode will

which

manual to determine

owner's

.

work

best in your

system

11

2 XCard

1 XCard

High-Pass

	HP
	LP
Low-Pass
	LP
14	HP
&
15
	Full Range
	FULL

– 6 –