125
Recording/playing back a performance
Recording/playing back a
performance
Combining the performances of multiple audio tracks—Bounce Recording
Depending on the number of instruments that you wish to record, eight audio tracks
may not be sufficient. In such cases, you can combine performances that were
recorded on multiple audio tracks, and re-record them onto another track. This
process is called bounce recording. By combining multiple performances in this
way, you can free up other audio tracks in order to record additional performances.
;

Bounce recording procedure

Here we will explain an example of how mono performances recorded on audio
tracks 1 and 2 can be mixed with the stereo performance recorded on audio tracks
3-4, and bounce-recorded on audio tracks 7-8.
1. For audio tracks 1, 2, 3, and 4 that you wish to combine, press [STATUS] to get it
to light in green.
2. Adjust the pan (left/right position) of the audio tracks for playback.
3. Press PLAY [ ] to play back, and use the AUDIO TRACK faders to adjust the
volume balance.
4. Use the MASTER fader to adjust the overall volume (recording level).
At this time, raise the volume as high as possible without allowing the sound to
distort. For the audio tracks that you do not want to mix (tracks 5-6), make their
[STATUS] go dark to mute them.
5. When you adjust the volume, press STOP [ ].
6. Press [BOUNCE] to get it to light.
7. Press the audio track 7 or 8 [STATUS].
The [STATUS] of audio tracks 7-8 will blink in red (recording-standby mode).
8. Press ZERO [ ] to return the SONG POSITION to “00:00:00-00”.
9. Press REC [ ].
REC [ ] blink (recording-standby mode).
10.Press PLAY [ ], and recording will begin.
11.Press STOP [ ] to stop recording.
A message of “Keep take? (NO/YES)” appears.
12.If you wish to save the take, press [YES/ENTER].
When CDX-1 complete to save, [BOUNCE] will go to dark, and the [STATUS] of the
selected recording destination tracks will go light in green.
If you press [NO/EXIT], saving to CD-RW discs will be cancelled.
13.Listen to the result of bounce recording.
Press audio tracks 1–4 [STATUS] to go dark (mute). Return to the location at which
you began recording, and press PLAY [ ] to play back audio tracks 7-8.

Playback/recording audio tracks for bounce recording

Each track can either play back or record. For example if you are bouncing to two tracks
in stereo, you will be able to play back the tracks that are not recording destinations;
i.e., you will be able to play back six tracks simultaneou during bounce recording.
Once performances have been
b
ounce-recorded to an audio
track, it will no longer be
possible to adjust the volume,
pan, or equalization of a
specific instrument or vocal. If
you need to keep the option of
individually adjusting pan,
equalization, etc., of an audio
track, you should not combine
it with other tracks by bounce-
recording.
“Adjusting the left/right
position (pan) of each audio
track” (p. 132)