Roland CDX-1 Playing a sequence track

96
Arranging audio samples to create a song—Sequence
Playing a sequence track
The number of sounds that can be played simultaneously is a total of four stereo
sounds for audio track playback, pad playback, and sequence track playback.
When the sequence is on, the playback priority will be in the order of sequence tracks
→ audio tracks → pads.
1. Press PAD SEQUENCING [SEQ PLAY].
fig.34-07
[SEQ PLAY] lights, and the Sequence Play
List screen appears.
At this time, the [STATUS] of all audio tracks
will go dark (muted).
2. Press CURSOR [ ].
fig.34-07
A cursor appears on box A of “Tr.SEL” (track
select).
3. Press CURSOR [ ] [ ] to move the cursor to the “Tr.SEL” (track select) box
for the sequence track (A–D) that you wish to play back.
4. Press CURSOR [ ].
fig.34-08
The “Tr.SEL” (track select) box will be
highlighted in black, indicating that it will
play back.
To cancel your selection, press CURSOR [ ].
5. If there are other sequence tracks that you wish to play back, repeat steps 3–4.
6. Press ZERO [ ] to return to the beginning of the performance.
7. Press PLAY [ ].
The sequence track(s) will play back.
8. When you are finished playing back the sequence track(s), press PAD
SEQUENCING [SEQ PLAY].
[SEQ PLAY] goes out, and sequence is turned off.
CURSOR