22
Panel Descriptions
INSERT EFFECTS section
Here you can make settings for the insert effect.
➔ “Using the insert effects” (p. 141), “Insert effect algorithm
list” (p. 175)
fig.14-02e

ON/OFF button

This button switches Insert Effect on and off.

PATCH button

Here you can switch the parameters displayed in the edit
section, and change the type of curve.
PHONES Section
fig.14-02ae

PHONES knob

This knob adjusts the volume of the headphones.
LOOP EFFECTS section
Here you can make settings for the loop effects.
➔“Using the loop effects” (p. 145), “Mixer effect parameter
functions” (p. 174)
fig.14-03e

DELAY button

This button accesses a screen where you can set the volume
(send level) that is sent from each audio track to the chorus/
delay/doubling loop effect, and a screen where you can edit
the chorus/delay/doubling settings.
*Chorus/delay/doubling cannot be used simultaneously. You can
select and use only one at a time.

REVERB button

This button accesses a screen where you can set the volume
(send level) that is sent from each audio track to the loop
effect, and a screen where you can edit the reverb settings.

RTN LEVEL (return level) knob

This knob adjusts the volume that is returned from the reverb
(the return level).