17
Using Pads/Sequences while you mix down
You can play sequence tracks and pads while mixing down. This can be done in any
combination: for example, you can mix down sequence tracks and pads together
with audio tracks, or mix down only pads and/or sequences.
Even if a CD-RW disc is not inserted, you can mix down just pads/sequences if
internal memory contains pads/sequences.
*When you mix down using pads/sequences, the time available for the mixdown will
be the remaining amount of sampling memory. For this reason, if you need to perform
lengthy mixdowns, we recommend that you expand the memory. The time available for mixdown
can be checked in the Song Information screen (Owner's Manual; p. 39).
1. Press AUDIO TRACK RECORD [MIX DOWN].
If the pads/sequences contained in the CDX-1’s internal memory, a message of
“Also use PAD/SEQ for Mixdown?” appears, [MIX DOWN] blinks.
If you press [YES/ENTER], you will be able to use pads/sequences, and
[MIX DOWN] will light.
If you do not want to use pads/sequences, press [NO/EXIT]. For the subsequent
steps, refer to step 1 of “Mixing down” (Owner's Manual; p. 133).
2. If you want to use sequence tracks, press [SEQ PLAY] to make it light.
For sequence tracks that you want to include in the mixdown. For details, refer to
“Playing sequence tracks and audio tracks simultaneously” (Owner’s Manual; p. 96).
3. For audio tracks that you want to include in the mixdown, press [STATUS] to
make the button light in green.
4. Make sure that master track [STATUS] light in red.
5. Press ZERO [ ] to return the SONG POSITION to “00:00:00-00” (beginning of
the song).
Alternatively, you can move to a desired location so that recording will start from
that point.
6. Press PLAY [ ].
Mixdown begins.
If you play samples pressing pads during mix down is processing, the sample
sounds in pads will be mixed down together. However, please be careful that sample
sound dose not come out in case four stereo (incl. audio track and sequence track)
are outputted. In such case, the pads goes out.
7. When mixdown is finished, press STOP [ ].
The screen will ask “Do you want to burn a CD? “
If you want to create an audio CD, press [YES/ENTER] and continue with the
procedure “Writing to a CD-R disc” (Owner’s Manual; p. 135).
If you want to make sure that the result of mixdown, press [NO/EXIT]. For details,
refer to “Listen to the result of Mixing down” (Owner’s Manual; p. 135).
When CD recorder screen or
CD player screen is appearing,
you cannot switch to mix down
eves pressing [MIX DOWN].
If you mix down without a
CD-RW disc, the “Data Type”
will be “Standard.”
If you mix down without a
CD-RW disc in step 1, a
message of “Also use
PAD/SEQ for Mixdown?” will
not appears.
A sequence track and its
corresponding audio track
cannot be played back
simultaneously. If you are
unable in step 3 to select an
audio track that you want to
mix down, you must first
exchange sequence tracks so
that the desired tracks can be
played back simultaneously.
For details, refer to
“Exchanging the content of
sequence tracks—Exchange
Track” (p. 7) in this booklet.
If you mix down without a
CD-RW disc, step 3 will not be
necessary.