Roland CDX-1 Viewing information on the CD-RW disc Song Information screen, Naming a song (CD-RW disc)

39
Basic operation of the CDX-1
Basic operation of the CDX-1
Viewing information on the CD-RW disc
—Song Information screen
You can view information about the CD-RW disc (song) inserted in the CDX-1.
1. Press [DISPLAY] to switch among the Basic screen.
The Information screen appears.
fig.12-07
Remain: This displays remaining capacity (time) for editing in min./sec.
When mixdown mode (p. 133) is selected, this displays remaining
capacity (time) for recording on mastering track (internal).
SNG: This displays the name of the CD-RW disc.
➔ “Naming a song (CD-RW disc)” (below section).
Data Type: This will indicate the data type that was selected when the CD-RW
disc was formatted.
➔ “Preparing a CD-RW disc for use—Format” (p. 110)
BNK: This shows the pad bank number and name.
➔ “Naming a pad bank” (p. 55)
Naming a song (CD-RW disc)
1. Press [UTILITY].
The Menu are displayed as icon.
fig.12-06
2. Press CURSOR [ ] to select the Song
Parameter icon.
3. Press [YES/ENTER].
fig.12-07
The Song Parameter screen appears.
4. Make sure that the cursor is located at the “Name” line.
5. Use CURSOR to move to the desired character location, and turn the
TIME/VALUE dial to input characters.
6. Press [DISPLAY] to return to the Basic screen.
Data Type
Remaining capacity for editing
different from remaining
capacity for recording. Even in
case the displayed time in
“Remain” shows some
capacity is remaining, CDX-1
stops recording when
remaining capacity for
recording run out. The
capacity differs recording to
data type (p. 111).
CDX-1 automatically stops
recording when remaining
capacity for recording is
00m00s. If you optimize the
disc, remaining capacity for
recording may increase. →
“Increasing the free space on a
CD-RW disc–Optimize Disc”
(p. 127)