Roland CDX-1 Changing the insert effect connections

144
More functions for the CDX-1
Changing the insert effect connections
By changing the connections of the insert effect, you can meet the needs of a wide
variety of situations. For example, you can apply effects to the playback of specific
audio tracks or audio sample pads, or adjust the sound during mixdown (p. 133)
1. Press [UTILITY].
The Menu are displayed as icon.
fig.5-13
2. Press CURSOR [ ] to select the Effects
location icon.
3. Press [YES/ENTER].
fig.5-14
The Insert Mode setting screen appears.
4. Turn the TIME/VALUE dial to switch the “Insert Mode.”
• INPUT (NORMAL):
fig.5-15
You will hear the sound that passes through
the insert effect. The sound that passes
through the insert effect (the same sound that
you hear) will also be recorded/sampled.
Normally you will use this setting.
• INPUT (REC DRY):
fig.5-16
You will hear the sound that passes through
the insert effect. The sound prior to passing
through the insert effect (i.e., the original
sound) will be recorded/sampled. Use this
setting when you wish to try various effects
after recording the sound.
• TRACK1–8, 1&2, 3&4, 5&6, 7&8:
fig.5-17
The insert effect will be applied to the audio
tracks. Use this setting when you wish to try
various effects after recording the direct
sound (i.e., the sound not processed by the
effect), or when you wish to apply an effect to
a specific audio track.
• MASTER:
fig.5-18
Use this setting when you wish to adjust the
tone during mixdown, or when you wish to
apply an effect to the entire sound, such as
during resampling (p. 63).
5. Press [DISPLAY] to return to the Basic screen.
By default, the insert effect is
inserted immediately after the
input source
(“INPUT (NORMAL)”).
AUDIO TRACK (REC)
PAD (REC)
Input level is always same
regardless to the position of
REC LEVEL knob in case of
“INPUT (REC DRY)” is
selected.