143
More functions for the CDX-1
Using the CDX-1 with
other MIDI devices
Saving insert effect settings
You can assign a name (patch name) to the edited effect settings, and save them.
Continue with this procedure after the preceding section, “Editing insert effect
settings.”
fig.5-07
1. In the screen that displays the effect block
diagram, press CURSOR [ ] a number of
times to select “NAME.”
2. Press [YES/ENTER].
The Patch Name input screen will appear.
3. Use the TIME/VALUE dial and CURSOR [ ] [ ] to input the desired
patch name.
4. When you are finished inputting the patch name and editing the settings of each
effect, press [NO/EXIT] to return to the effect block diagram screen.
fig.5-08
5. Press CURSOR [ ] to select “WRITE,”
and press [YES/ENTER].
fig.5-09
6. Turn the TIME/VALUE dial to select the
patch-save destination.
7. After you have specified the patch-save destination, press [YES/ENTER].
When the data has been saved, you’re returned to the patch select screen.
8. Press [DISPLAY] to return to the Basic screen.
Copying a patch to create a new patch
If you wish to create two or more patches with similar effect settings, it is convenient
to copy the patch.
1. Press INSERT EFFECTS [PATCH].
The patch select screen appears.
2. Turn the TIME/VALUE dial to select the copy-source patch.
fig.5-10
3. Press CURSOR [ ] to select “COPY.”
4. Press [YES/ENTER].
The Copy Effect setting screen will appear.
fig.5-11
5. Turn the TIME/VALUE dial to select the
patch-copy destination.
6. When you have specified the patch-copy destination, press [YES/ENTER].
When the copy is completed, you’re returned to the patch select screen.
7. Press [DISPLAY] to return to the Basic screen.
Song patch data is not saved
immediately when you write
it; rather, it is saved to CD-RW
disc when you save the song or
when you automatically turn
off the power. For this reason,
the song patch data will be lost
if you turn off the power by
disconnecting the AC adaptor
instead of using the power
switch. Please use caution.
Press CURSOR [ ] to move
the cursor to “From” line, you
can change the copy-source
patch.