Roland E-80 - page 19

Front panel
E-80 Music Workstation r
19
Note: For the “LINE” setting to work with electric guitars or
basses, you need to connect such instruments to an effects
pedal or rack effect (in bypass mode) and connect the effect’s
output to the INPUT socket.
INPUT socket: This is where you can to connect an
optional microphone (like a Roland DR-10 or DR-20)
or other external signal source you wish to process
using the E-80’s Vocal Harmonist facility. This is a
combo socket to which you can connect either a bal-
anced XLR or unbalanced 1/4” jack. (The socket does
not provide phantom power.)
Note: The INPUT socket is mono.
M OUTPUT MAIN R & L/MONO sockets
These sockets need to be connected to an external
amplifier, mixing consoles, etc. There is a switch that
allows you to switch off the E-80’s internal speakers
when using these sockets. See n above.
Note: If you can/want to use only one channel on your exter-
nal amplifier, connect the L/MONO socket to its input. For opti-
mum sound quality, we recommend working in stereo, though.
N AC socket
This is where you need to connect the supplied power
cord.