Editing individual Style events (Style Micro Edit)
E-80 Music Workstation
r
223
Both “Degree” and “Nearest” allow you to specify the note
range (“Limit Low” and “Limit High”) the selected part may
play. Notes that would fall outside that range during
Arranger playback are automatically transposed to values
inside the selected range. Rather than specifying two note
values, you can also choose “Std”, which means that the
E-80 decides automatically when extremely high (or low)
notes need to be shifted down (or up) by one or several
octaves.
Other edit operations
The fields in the right half of the STYLE MICRO EDIT
page allow you to reduce or expand the number of
events of the track you selected.
■CREATE EVENT
Press this button icon to add a new event to the
selected track. The following pop-up appears:
If the position for which you create a new event
already contains other events, the new event is added
at the end of that group.
• Press the button icon that corresponds to the kind of
event you want to add.
The meaning of the available message types should
be clear by now. Here are the default values of the
events you create:
• Specify the position where your new event should be
inserted by pressing the [BAR], [BEAT] and [CPT] fields
and entering the desired value for each unit using
the [DATA÷ENTRY] dial or the [DEC]/[INC] buttons.
• Press the [EXECUTE] field to confirm your settings
and add the new event.
Press [CLOSE] to close the pop-up window without
applying your changes.
If you press the [NOTE] field, the display changes to:
This pop-up window allows you to enter up to 10
notes for each position (see the [BAR], [BEAT] [CPT]
fields). The velocity values of the keys you press are
also adopted.
• To enter chords: press and hold the key of at least
one constituent note, then press the remaining keys.
Any key you press after releasing the keys of notes
already entered in the “table” replaces the “old”
notes.
• Press one of the note icons to specify the duration of
the note(s) shown in the “table”. This is possible both
before and after playing the required note(s) on the
keyboard.
• Press the [EXECUTE] field to confirm your settings
and add the new note(s).
Note:Note Number: 60 C4
On Velocity: 100
Gate Time: 60
Program Change:CC00 Bank Select MSB, value “0”
CC32 Bank Select LSB, value “4”
Program Change Number “1”
(The bank select messages are added
automatically: you don’t have to
worry about that.)
Pitch Bend:“0”
Alteration Mode:Nearest
Limit Low: Std
Limit High: Std
Adding notes