124
Editing a Sample

Importing a Audio File

Here’s how an audio file (WAV/AIFF) can be loaded into memory
as a sample.

Place the audio files in the “TMP/AUDIO_IMPORT” folder on
the user memory or memory card. For details on how you can
use your computer to copy a file into the user area or memory
card, refer to p. 184.

1.

From the Sample List screen or Sample Edit screen (p. 124),
press [MENU] to select “Import Audio”, and then press
[ENTER].

2.

Press [1 (User)] or [2 (Card)] to select the import-source
area.

User: Select a file from the user area.
Card: Select a file from the memory card.

3.

Use [CURSOR] to move the cursor to the “TMP/
AUDIO_IMPORT.”

4.

Press or , then select the file that you want to import.

If you want to select two or more samples, press [5 (Mark Set)] to
add a check mark (

✔

) to the files that you want to select. To
remove the check mark, press [4 (Mark Clear)].
If you hold down [SHIFT] and press [5 (Mark Set All)], a check
mark will be added to all files of the selected bank. If you hold
down [SHIFT] and press [4 (Mark Clr All)], check marks will be
removed from all selected files.

5.

Press [8 (Import)].

A message will ask you for confirmation.

* To cancel, press [7 (Cancel)].

6.

Press [8 (Exec)].

The file will be imported, and the Sample List screen will appear.

* To cancel, press [7 (Cancel)].

The imported file will be added to the sample list as a sample.
This sample is temporary, and will be lost when you turn off the
power. If you want to keep it, press [WRITE] to save the data.

Displaying Sample Edit Screen

1.

When you press [SAMPLE EDIT] in the sampling section.

The Sample Edit screen will appear.

fig.SMPL06_50

Samples that you edit will be lost when you turn off the power.
If you want to keep them, you must Save them (p. 134).

Magnifying/Shrinking the

Waveform Display (Zoom In/Out)

Here’s how to change the magnification of the sample display.

1.

In the Sample Edit screen, press [7 (Zoom In/Out)].

The Zoom In/Out sub-window will appear.

fig.SMPL11_50

2.

Use [CURSOR] to change the magnification of the display.

• Horizontal axis (time axis): 1/1–1/65536
Press to increase the display magnification.
Press to decrease the display magnification.
* Either turn the VALUE dial or use [INC], [DEC] to adjust this
setting.
• Vertical axis (waveform amplitude axis): x1–x128
Press to increase the display magnification.
Press to decrease the display magnification.
3.
Press [8 (Close)] to close the sub-window.
Even without displaying the Zoom In/Out sub-window, you
can press CURSOR to expand/shrink the horizontal
axis, or hold down [SHIFT] and press CURSOR to
expand/shrink the vertical axis.
Reference_e.book 124 ページ ２００３年７月１４日　月曜日　午後３時２５分