26

Playing in Patch Mode

In Patch mode, the keyboard and the pads are each used to play a
single sound (patch/rhythm set).
The keyboard controller section and the pad controller section each
have their own sound generator part, and each are connected by
their own MIDI channel. This means you can play separate sounds
on the keyboard and the pads.

About the Patch Play Screen

Displaying Patch Play Screen

To access the Patch Play screen, use the following procedure.

1.

Press [PATCH/RHYTHM].

You will enter Patch mode, and the Patch Play screen appears.
The Fantom-S has two parts; a Keyboard part and a Pad part.

2.

Press [1 (Kbd Part)] to select the Keyboard part.

fig.02-00a.e

3.

Press [2 (Pad Part)] to select the Pad part.

fig.02-00b.e

4.

Press [7] to switch the Patch Play screen.

This screen simultaneously displays the settings of the Keyboard
part and the Pad part.

fig.PATCH_50

Press [8 (Part Level)] to adjust the volume of the keyboard part
and pad part.
Pressing [8 (Part Level)] will open a window where you can
adjust the volume of the keyboard part and pad part.
Press [6] (keyboard part) or [7] (pad part) to select the part, and
turn the VALUE dial or use [INC][DEC] to adjust the volume.
Press [8 (Close)] to close the window.

fig.02-00c_50
Patch number
Patch name
Patch group
Patch type Patch Category
Patch number / Patch name
Patch group
Patch type Patch Category
Reference_e.book 26 ページ ２００３年７月１４日　月曜日　午後３時２５分