127
Editing a Sample

Editing a Sample

fig.SMPL18_50

4.

Press or to select the part, and then press [8
(Select)].

If a rhythm set is not assigned to the selected part, a message will
ask "Change into Rhythm and Initialize?", asking if you want to
assign an initialized rhythm set to the selected part.
The Assign to Pad screen will appear.

fig.SMPL20_50

5.

Select the desired pad by pressing it directly.

6.

Press [8 (Exec)].

If you add a check mark to [1 (Tempo Sync)], the Wave Tempo
Sync parameter (p. 69) will be turned ON for the rhythm tone
that is assigned.
A message will ask your confirmation.

7.

Press [8 (Exec)] to execute Assign to Pad.

The sample will be assigned (as a rhythm tone) to the specified pad.
To cancel, press [7 (Cancel)].
8.
Press [EXIT] to return to the previous screen.

You cannot listen to a multisample unless you assign it to a part
as a patch.

If you select another rhythm set, the rhythm set you assigned
will be replaced by that patch. If you want to keep the patch you
created, press [WRITE] and save it.

Assigning a Sample as a Patch

to a Part (Assign to Keyboard)

Here’s how you can use the currently selected sample to create a
patch, and assign it to a keyboard part.

* From the Sample List screen you can also press [7 (Load Utility)]

→

[2
(Assign to Pad)] to execute Assign To Pad.
* You cannot execute this with more than one sample selected.

From Patch Mode

1.

Press [SAMPLE LIST] to select a sample, and then press
[SAMPLE EDIT] to access the Sample Edit screen.

2.

Press [6 (Assign KB/Pad)].

Assign to Kbd/Pad window appears.

fig.SMPL17_50

3.

Press [6 (Assign to Kbd)].

The Assign to Keyboard window will appear, and you can verify
the assignment for the keyboard part.

4.

Press [8 (Exec)]

If you add a check mark to [2 (Tempo Sync)], the Wave Tempo
Sync parameter (p. 45) will be turned ON for the patch that is
assigned.
A message will ask you for confirmation.

5.

Press [8 (Exec)].

The sample will be assigned (as a patch) to the specified
keyboard part.
To cancel, press [7 (Cancel)].

From Performance Mode

1.

Press [SAMPLE LIST] to select a sample, and then press
[SAMPLE EDIT] to access the Sample Edit screen.

2.

Press [6 (Assign KB/Pad)].

Assign to Kbd/Pad window appears.

fig.SMPL17_50

3.

Press [6 (Assign to Kbd)].

Assign to Keyboard window appears.

fig.SMPL18_50

4.

Press or to specify the part to which the new patch
is to be assigned, and then press [8 (Select)].

The Assign to Keyboard window will appear, and you can verify
the assignment for the part.

5.

Press [8 (Exec)]

If you add a check mark to [2 (Tempo Sync)], the Wave Tempo
Sync parameter (p. 45) will be turned ON for the patch that is
assigned.
Reference_e.book 127 ページ ２００３年７月１４日　月曜日　午後３時２５分