40
Creating a Patch
9.
If you wish to save the changes you’ve made, press [WRITE]
to perform the Save operation (p. 42). If you do not wish to
save changes, press [EXIT] to return to the Patch Play
screen.
If you return to the Patch Play screen without saving, an “*” will
be displayed at the left of the patch number, indicating that the
patch settings have been edited.
If you turn off the power or select a different sound while the
display indicates “*,” your edited patch will be lost.
You can also select the edit group by holding down [SHIFT] and
pressing or . It is convenient to use this feature when
the Tone SW/Select window is displayed.
Editing in a Graphic Display (Zoom Edit)
You can edit while viewing a graphic display of the most frequently
used important parameters.
Zoom Edit lets you edit the following parameters.
1.
Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the part (keyboard part or pad part) and patch
that you want to edit.
2.
Press [EDIT], and then press [3 (Zoom Edit)].
The Zoom Edit screen will appear.
fig.03-03a_50
3.
The parameters are organized into several edit groups.
Press [1]–[4] to select the tab for the parameters that you
want to edit.
To switch the parameter you want to edit
Press [6].
To switch to a different part for editing
Press [7 (Part Select)].
To select a tone for editing or switch a tone on/off
Press [8 (Tone Sw/Sel)].
4.
Use [CURSOR] to move the cursor to the parameter that you
want to edit.
You can use the realtime control knob to set the value.
5.
Turn the VALUE dial or use [INC][DEC] to modify the value.
6.
When you have finished editing, press [EXIT].
Initializing Patch Settings (Init)
“Initialize” means to return the settings of the currently selected
sound to a standard set of values.
The Initialize operation will affect only the currently selected
sound; the sounds that are stored in user memory will not be
affected. If you wish to restore all of the Fantom-S’s settings to
their factory values, perform a Factory Reset (p. 196).
1.
Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the part (keyboard part or pad part) and patch
that you want to initialize (p. 27).
2.
Press [EDIT].
3.
Press [4 (Init)].
A message will ask you for confirmation.
4.
Press [8 (Exec)].
The initialization will be carried out, and you’ll be returned to
the Patch Edit screen.
To cancel, press [7 (Cancel)].
Copying Patch (Tone) Settings (Copy)
This operation copies the settings of any desired patch to the
currently selected patch. You can use this feature to make the editing
process faster and easier.
1.
Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the part (keyboard part or pad part) that you want
to edit and the copy-destination patch (p. 27).
2.
Press [EDIT].
3.
Press [5 (Tone Copy)].
The Patch Copy window appears.
fig.03-03_50
4.
Press [CURSOR] to move the cursor, select the “Source
(copy-source)” bank and number, and patch/tone.
5.
Turn the VALUE dial or use [INC][DEC] to make settings.
6.
Press [CURSOR] to move the cursor, select the “Destination
(copy-destination)” patch/tone/number.
7.
Turn the VALUE dial or use [INC][DEC] to make settings.
8.
Press [8 (Exec)].
A message will ask you for confirmation.
9.
Press [8 (Exec)] to return to the Patch Edit screen.
To cancel, press [7 (Cancel)].
Parameter page Parameter page
Pitch Envelope p. 50 TVA Envelope p. 54
TVF p. 50 Structure Type p. 46
TVF Envelope p. 52 LFO 1/2 p. 56
TVA Envelope p. 54