73
Creating a Rhythm Set

Creating a Rhythm Set

Cutoff V-Curve (Cutoff Frequency Velocity Curve)

Selects one of the following seven curves that determine how
keyboard playing dynamics (velocity) influence the cutoff frequency.
Set this to “FIXED” when the Cutoff frequency is not to be changed
according to the force with which the keys are pressed.

Value:

FIXED, 1–7

fig.Curve-7

Cutoff V-Sens (Cutoff Velocity Sensitivity)

Use this parameter when changing the cutoff frequency to be
applied as a result of changes in playing velocity. If you want
strongly played notes to raise the cutoff frequency, set this
parameter to positive (+) settings. If you want strongly played notes
to lower the cutoff frequency, use negative (-) settings.

Value:

-63– +63

Resonance V-Sens

(Resonance Velocity Sensitivity)

This allows keyboard velocity to modify the amount of Resonance. If
you want strongly played notes to have a greater Resonance effect,
set this parameter to positive (+) settings. If you want strongly
played notes to have less Resonance, use negative (-) settings.
Value:
-63– +63

TVF Env

F-Env Depth (TVF Envelope Depth)

Specifies the depth of the TVF envelope. Higher settings will cause
the TVF envelope to produce greater change. Negative (-) settings
will invert the shape of the envelope.
Value:
-63– +63

F-Env V-Curve (TVF Envelope Velocity Curve)

Selects one of the following 7 curves that will determine how
keyboard playing dynamics will affect the TVF envelope. Set this to
“FIXED” when the amount of TVF Envelope applied is not to be
changed according to the force with which the keys are pressed.

Value:

FIX, 1–7

fig.Curve-7

F-Env V-Sens (TVF Envelope Velocity Sensitivity)

Specifies how keyboard playing dynamics will affect the depth of the
TVF envelope. Positive (+) settings will cause the TVF envelope to
have a greater effect for strongly played notes, and negative (-)
settings will cause the effect to be less.

Value:

-63– +63

F-Env T1 V-Sens

(TVF Envelope Time 1 Velocity Sensitivity)

This allows keyboard dynamics to affect the Time 1 of the TVF
envelope. If you want Time 1 to be speeded up for strongly played
notes, set this parameter to a positive (+) value. If you want it to be
slowed down, set this to a negative (-) value.

Value:

-63– +63

F-Env T4 V-Sens

(TVF Envelope Time 4 Velocity Sensitivity)

The parameter to use when you want key release speed to control the
Time 4 value of the TVF envelope. If you want Time 4 to be speeded up
for quickly released notes, set this parameter to a positive (+) value. If
you want it to be slowed down, set this to a negative (-) value.

Value:

-63– +63

F-Env Level 1–4

(TVF Envelope Level 1–4) , ,

Specify the TVF envelope levels (Level 0–Level 4). These settings specify how the cutoff frequency will change at each point, relative to the standard cutoff frequency (the cutoff frequency value specified in the TVF screen).

Value:

0–127

F-Env Time 1–4 (TVF Envelope Time 1–4)

Specify the TVF envelope times (Time 1– Time 4). Higher settings will
lengthen the time until the next cutoff frequency level is reached. (For
example, Time 2 is the time over which Level 1 will change to Level 2.)

Value:

0–127

fig.TVF Env.e

Adjusting the Volume (TVA/TVA Env)

fig.04-15_50

For details on the setting, refer to

“How to Make the Rhythm
Set Settings”

(p. 64).
1234567
1234567
1 2 4
3
T1 T2 T3 T4
L3
L1
L0 L2 L4
Note off
Cutoff
Frequency Time
Note on
T: Time L: Level
Reference_e.book 73 ページ ２００３年７月１４日　月曜日　午後３時２５分