162
Editing Songs

Adjusting the Song’s Playback Time

(Time Fit)

This function calculates the playback time of a song or allows you to modify
the tempo track data so that the song will play back in a specified time.

fig.11-28_50

For details on the settings, refer to

“Basic Operation for Track
Editing”

(p. 151)

Measure, For (Edit Range)

Measure the playback time, or check/modify the range of measures
that are to be adjusted. If you set “For” to “ALL,” all measures will
be specified.

Time H/M/S

The playback time will be displayed. From left to right, the time
display indicates “hours: minutes: seconds.”

Time Original H/M/S

The current playback time will be displayed.

Deleting Blank Measures (Truncate)

Copying or merging may sometimes create blank measures at the
beginning of a phrase track or pattern. Truncate deletes silent portions
from the beginning of the specified phrase track to the first note-on.

If other sequencer data (such as program changes or control
changes) is recorded between the beginning and the first note-on
of the specified phrase track, only the last data event of each type
will be placed before the note-on.

fig.11-29_50

For details on the settings, refer to

“Basic Operation for Track
Editing”

(p. 151)

Track / Pattern (Source Track)

Specifies the phrase track or pattern from which blank measures will
be deleted.

Value
TRK 1–TRK 16:

The specified phrase track

PTN001–PTN100:

The specified pattern
Below the Track parameter is displayed the location of the beginning
of the specified track, and the position of the first note-on.

Editing Individual Items of

Sequencer Data (Micro Edit)

Micro Edit lets you edit individual items of sequencer data recorded
in a song, such as MIDI messages and tempo data.

Editing Sequencer Data

(Basic Procedure in the Microscope)

Access the Microscope screen when you want to view the sequencer
data recorded in a song. Each line indicates the location (measure-
beat-clock) at which the sequencer data is recorded, and the data
recorded at that location.

1.

Load the song that contains the sequencer data you want to
view/edit (p. 149).

2.

Press [EDIT].

The Microscope screen appears.
Press or to view sequencer data.

fig.11-30.e

3.

Press [6] to switch the screen.

Each time you press [6] you will switch between the two screens.

4.

Press [7 (Trk/Ch Select)] to move the cursor to “Track,” and
select the track or pattern whose sequencer data you want
to view/edit.
TRK 1–TRK 16:

The specified phrase track

TEMPO:

Tempo track

BEAT:

Beat track

PTN001–PTN100:

The specified pattern (pattern mode only)