3 Maintenance
3-5 How to Replace the Separating Knife
Do not touch the tip of the separating knife with your fingers.
Doing so may result in injury.
Make sure the power to the unit is off before attempting to replace the separating knife.
Doing so may result in injury.
If the separating knife, replace it with the replacement blade included with the
1 Press the [POWER] key to switch off the power. | 2 Turn off the main power switch. | ||||||||||
The POWER LED goes out |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 | Remove the separating knife. | |
| (1) | Loosen the screw until it slips out. |
| (2) | Grasp the screw portion, and slowly pull it out in |
the direction of the arrow.
* Do not pull back while doing this.
(2)
(1)
If the blade remains in the carriage, use commercially available tweezers to remove it.
4 Replace with a new knife.
Positioning groove
| The knife is secured in |
| place by the magnet. |
5 | Install the separating knife. |
(1) Grasp the screw portion and slowly insert it into the groove.
* Take care to ensure that the knife does not slip
(2) Tighten the screw.
(1)
(2)
41