1 Introduction
1-2 Part Names
NOTICE | If you will leave the printing head being uncapped for a long time (for example, open the front cover while |
| printing is made on the middle of platen), printing heads may get clogging and, in some case it results unrecov- |
| erable damage to the printing head. |
|
|
| Do not touch the Y rail or the inner side of the right cover. |
| Touching the area shown may cause the fingers to be soiled by grease or ink, and may result in diminished |
| image quality. |
| Entire |
Do not put hands inside
Operation Panel
For more information about the keys, take a look at
Display | [SHEET CUT] key |
This show the various setting menus, |
|
and messages. | [CLEANING] key |
| [PRINT QUALITY] key |
SETUP LED [SETUP] key
PAUSE LED [PAUSE] key
BASE POINT LED [BASE POINT] key
POWER LED [POWER] key
Arrow key | [ENTER] key | BUSY LED |
( [ ] [ ] [ ] [ ] ) | [MENU] key | This flashes while data is being received from the host computer. |
|
|
10