Roland FJ-40, FJ-50 2-4Loading the Material, Loading Roll Material

2 Basic Operation

2-4 Loading the Material

Roll material must be placed at a predetermined shaft position.

Failure to do so may result in falling of the roll, leading to injury.

Loading Roll Material

Acceptable material widths

FJ-50

210 mm to 1350 mm (8-5/16" to 53-1/8")

FJ-40

210 mm to 1125 mm (8-5/16" to 44-1/4")

Rear

1	Secure the retainer on the left-hand side in place at the
	location shown in the figure.
	Tighten the screw to secure in place.		Left-hand retainer
	* When using roll material, the retainer on the left-
	hand side should always be used secured in
	place at the location shown in the figure.
			100 mm (3-15/16")
2	Line up with the core diameter of the loaded roll material and refit
	the left- and right-hand media flanges.
				Media flange
	Flange retaining pin	Media flange
				50.8 mm	76.2 mm
		(2")			(3")

(2)

(1)

Line up the ridges and grooves.

(3)

(4)

19