Roland FP-3 owner manual Recording a Performance, Press the Rec button

Chapter 3 Recording a Performance

You can easily record your performances.

You can play back a performance you have recorded to check what and how you played, and play melodies on the keyboard along with prerecorded accompaniment using the Rhythm.

Notes Regarding Recording

•Only one song can be recorded. With second or later recordings, the previously recorded song is erased as the new material is recorded. When recording a new performance, it is probably a good idea to erase the previously recorded performance first (p. 37).

•Recorded performances are erased when the power is turned off.

Recording a Performance

This records only what you play on the keyboard, without using the Rhythm.

To Record Without Erasing

the Previously Recorded

Performance...

1st Pass

2nd Pass

The first Perform- ance is preserved

					5
3	2	4	6, 8	7		1

1. Press the [Song] button, getting its indicator to light.

The song number appears in the display.

2. Press the [-] button to display the “USr.”

3. Select the Tone to be played.

4. If necessary, sound the metronome.

While listening the metronome, select the tempo and beat of the song (p. 23).

5. Press the [Rec] button.

The [Rec] button’s indicator lights, the [Play] button’s indicator begins flashing, and the FP-3 is put into recording standby.

6. Press the [Play] button or play a key on the keyboard to begin recording.

Press the [Play] button, and after two measures of count sound, recording begins.

Recording will begin when you start playing the keyboard, even if you do not press the [Play] button. In this case, a count is not sounded.

7. Press the [Rec] button or the [Play] button to stop recording.

The indicators for the [Rec] and [Play] buttons are extinguished, and recording stops.

Listening to the Recorded Performance

8. Press the [Play] button.

Press the [Play] button again, and playback stops.

NOTE

When you record additional material without erasing the previously recorded sounds, the song is recorded at the initially recorded tempo.

During the count-in, the count measure is indicated in the display as “-2” then “-1.”

About “USr” in the Display

When recording is stopped,

the “ ” indication

changes to “ ” in the display. The “.” in the display indicates that there is Performance material already recorded.

33