44
Editing Using Only the JV-1010

Making Part Settings (PART)

fig.1-30
Now try changing the level setting (Level) for PART 2 in Performance
mode.
fig.1-30a
1Press the VALUE knob to choose the Performance mode
(PERFORM).
Pressing the VALUE knob makes the mode change sequentially. Press the
knob several times, until the PERFORM indicator lights up.
2While holding down the VOLUME knob, press the VALUE
knob.
Switch to the Edit mode.
3Turn the CATEGORY/BANK knob to choose USER (Level).
4Turn the PART knob and choose 2.
In Edit mode, you can select USER (Level) with the CATEGORY/BANK
knob to change the volume level setting for each part.

32,6 1,54

When in the Patch mode,
you can’t enter the Edit
mode.
For more information
about the CATEGORY/
BANK knob’s other
functions in Edit mode,
refer to the EDIT
PARAMETER SELECT
chart on the JV-1010’s top
panel.