41
Trying Out Desktop Music
Quick Start

■Connecting with MIDI Connectors

If you have a MIDI interface (such as Roland’s Super MPU64) connected to
your computer or are connecting to a MIDI interface adaptor, you can then
connect using the MIDI connectors.
1Switch off the power to the JV-1010, the computer, and any

connected equipment.

2Set the COMPUTER switch on the JV-1010’s rear panel to MIDI.
fig.1-26
3Use a MIDI cable to connect the MIDI OUT connector of the

MIDI interface with the JV-1010’s MIDI IN connector.

4Use a MIDI cable to connect the MIDI IN connector of the

MIDI interface with the JV-1010’s MIDI OUT connector.

fig.1-27.e
For instructions on
connecting to a computer
using a MIDI interface,
refer to the owner’s manual
that was supplied with the
MIDI interface.
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
Before changing the
COMPUTER switch
setting, first switch off the
power to the JV-1010.
JV-1010 rear panel
JV-1010 rear panel
Modem or
Printer Port
MIDI interface adaptor
IN
MIDI
OUT
The setting
is MIDI
Apple Macintosh
PC Super MPU64
USB
cable
USB
Connector
The setting
is MIDI