109
Creating and Editing Songs
■Correcting Timing Discrepancies (Quantize)
You can correct for timing discrepancies in a recorded
performance by automatically aligning the music with the
timing you specify. This is called “Quantizing.”
As an example, let’s say that the timing of some quarter-
notes in a performance is a little off. In this case, you can
quantize the performance with quarter-note timing, thus
making the timing accurate.
fig.e-quantize.e
At Step 3 of “Selecting the editing function” (p. 107), select
<Quantize>.
A screen like the one shown below appears.
fig.d-e-quant.eps_50
When finished with the Quantize settings, return to the Song
Edit screen.
Mode
Data can be copied in the following three ways:
Replace
If there is a performance recorded at the copy
destination, this previous recording is erased,
and the copied data is written in its place.
Mix
If there is a performance recorded at the copy
destination, the copied data is layered over the
previous recording. If the Tones used for the
copy source and copy destination are different,
the copy-destination Tone is used.
Insert
If there is a performance recorded at the copy
destination, the copied portion is inserted with-
out erasing the previous recording. The song is
lengthened by the number of inserted mea-
sures.
Item Content
1 2 3 4
1 2 3 4
Example: Quarter-note resolution
Example: Sixteenth-note resolution
Actual note data
Note data after quantization
Actual note data
Note data after quantization
Item Content
From Measure number of the first measure of the
segment to be quantized
For Number of measures to be quantized
Tr/Pt
Track button or part number to be
quantized
Choosing “All” quantizes the same passage
in all Parts.
Resolu-
tion
Quantization timing
Select one of the following values
1/2 (half note), 1/4 (quarter note),
1/6 (quarter-note triplet), 1/8 (eighth note),
1/12 (eighth-note triplet), 1/16 (sixteenth
note), 1/24 (sixteenth-note triplet),
1/32 (thirty-second note)
KR105.book Page 109 Tuesday, June 7, 2005 5:25 PM