Roland KR105 - page 70

70
Practice Functions
Setting Markers for Repeated Practice
(Marker)
By setting markers at points in a song that you want to practice repeatedly, you can
then easily go to and repeat play back of the selected measures.
■Placing a Marker within a Song
You can place two separate markers (Marker A and Marker B) in one song. These
markers are placed at the beginning of a measure to make the beginning and end of
a section of music. Placing markers is a handy way to start playback at the same
place as many times as you like. You can add markers or move to a marker even
while playback is in progress.
Access the Marker Screen
First, select the song in which you’ll set the markers (p. 54).
1. Press the [Count/Marker] button.
2. Touch <Marker>.
The Marker screen appears.
fig.d-marker.eps_60
Placing Markers
3. Go to the measure where you want to set a marker using the [ (Bwd)]
and [ (Fwd)] buttons.
4. Touch <- - -> for Marker A.
Marker A is placed at the beginning of the measure you selected.
“- - -” on the screen will change to the number of the measure where you placed the
marker.
5. In the same way, touch the Marker B <- - -> to set Marker B.
It is not possible to assign marker B to the same location or a measure before marker A.
Markers can also be assigned
in units of beats rather than
measures. Refer to “Placing a
Marker in the Middle of a
Measure” (p. 131).
KR105.book Page 70 Tuesday, June 7, 2005 5:25 PM