12
The R-1’s controls and connectors
fig.panel-1
Internal mic
This is a stereo microphone that’s built into the R-1.
You can’t use the internal microphone if a microphone or other device is connected to
the
mic jacks
or
line input jacks
. If you want to use the internal microphone,
don’t connect anything to the other input jacks.
When recording via the internal microphone, set the mic type select switch to DYN.
Display
Various information about the R-1’s operating state is shown here.
EFFECT button
Press the
EFFECT button
to switch the effect on/off.
This button will light red when the effect is on.
If you turn this on before or during playback, the effect will be applied to the sound that
is being played back. If you turn this on before or during recording, the effect will be
applied to the sound that is being input; i.e., the sound that has been processed by the
effect will be recorded.
The R-1 provides various effects that let you modify the sound being played back or
recorded, giving the sound more impact or allowing more comfortable listening. You
can also transform the sound to give it a totally new character.
EDIT button
Use this button to make effect settings.
For details on the effects, refer to
“Using effects”
(p. 46). You can make effect settings
regardless of whether the
EFFECT button
is on or off.
16
14
15
3
2
1
4
8
5 6
7
11
910
12 13
1
18 19
2
3
4
R-1_egfis1.book 12ページ ２００５年１１月１１日 金曜日 午後５時１３分