50
Using effects
06: Hum Noise Cut07: Reverb08: Int-Mic Rec.09: Ext-Mic Rec.10: Mastering
Parameter name Range of values Explanation
Frequency
50Hz
, 60Hz Specifies the frequency at which hum will be cut.
Depth 0–
80
–100 Adjusts the amount by which hum will be cut.
Low Gain -12dB–
0dB
–+12dB Adjusts the low-range gain.
High Gain -12dB–
0dB
–+12dB Adjusts the high-range gain.
Level 0–
80
–100 Adjusts the output volume.
Parameter name Range of values Explanation
Type
Hall
, Room, Plate Selects the type of reverb.
Time 1–
50
–100 Adjusts the length of reverberation.
Balance D100:0W–
D50:50W
–
D0:100W Adjusts the proportion between the original sound
and the reverberation.
Low Gain -12dB–
0dB
–+12dB Adjusts the low-range gain.
High Gain -12dB–
0dB
–+12dB Adjusts the high-range gain.
Level
0
–100 Adjusts the output volume.
Parameter name Range of values Explanation
Type
1
–5 Selects the type of transformation.
Low Gain -12dB–
0
dB
–+12dB Adjusts the low-range gain.
High Gain -12dB–
0dB
–+12dB Adjusts the high-range gain.
Level 0–
80
–100 Adjusts the output volume.
Parameter name Range of values Explanation
Type
1
–5 Selects the type of transformation.
Low Gain -12dB–
0dB
–+12dB Adjusts the low-range gain.
High Gain -12dB–
0dB
–+12dB Adjusts the high-range gain.
Level 0–
80
–100 Adjusts the output volume.
Parameter name Range of values Explanation
Clarity 1–
50
–100 Adjusts the amount of clarification applied to the
sound.
Crossover
200Hz, 250Hz, 315Hz,
400Hz, 500Hz, 630Hz,
800Hz
, 1kHz, 1.25Hz,
1.6kHz, 2kHz
Specifies the frequency at which the low- and high-
range compressors are divided.
Low Compress 0–
50
–100 Adjusts the amount of compression for frequencies
below the Crossover point you specified.
High Compress 0–
50
–100 Adjusts the amount of compression for frequencies
above the Crossover point you specified.
Low Gain -12dB–
0dB
–+12dB Adjusts the low-range gain.
High Gain -12dB–
0dB
–+12dB Adjusts the high-range gain.
Level 0–
80
–100 Adjusts the output volume.
R-1_egfis1.book 50ページ ２００５年１１月１１日　金曜日　午後５時１３分