16
The R-1’s controls and connectors
fig.panel-3
Power switch This turns the power on/off.
Do not turn off the power during playback or recording. You must make sure that
playback or recording is stopped before you turn off the power.
•If you accidentally turn off the power during recording, the data being recorded will
not be saved to the CompactFlash card.
•The CompactFlash card may be damaged if you turn off the R-1’s power while data is
being read or written, such as during playback or recording.
•If you turn off the R-1’s power while the “Now working...” indication is shown during
effect editing or while saving a setting you’ve changed, the R-1 will become unstable,
and may become unable to start up.
Be very careful to never turn off the power when the unit is in such states.
AC adaptor jack Connect the included AC adaptor to this jack.
HOLD switch If you set the
HOLD switch
to the ON position, button presses on the R-1 will be
disabled; this is a convenient way to prevent the R-1 from being operated accidentally.
However, even when the
HOLD switch
is ON, the
mic type select switch
,
input
volume
,
power switch
, and
output volume
will still be operable.
Output volume This adjusts the volume that is sent from the
headphone/line output/digital
output jack
. However, the volume of the digital output is not adjustable.
Headphone/line output/digital output jack This jack outputs audio from the R-1 to headphones or external speakers. If you want to
output a digital signal, use a round optical mini-type digital cable.
Eject button Press this to eject the CompactFlash card inserted in the
memory card slot
.
Memory card slot Insert a CompactFlash card into this slot.
CompactFlash is the only type of memory card that the R-1 can use.
1
24 25 2623 27 28
22
22
23
24
19
20 22 25
25
26
26
27
28
28
R-1_egfis1.book 16ページ ２００５年１１月１１日 金曜日 午後５時１３分