Installing the Mirror
Required tool
Small
(3)
Secure in place with the bolt.
Align with the tip of the stand's metal portion.
(1)
(2)
Mirror
Stopper
Power Cord Connection and Large Retainer Installation
Attach the retainer (large) to the back of the stand, and arrange the cord connected to the main unit so that it is secured in place as shown in the figure.
Front
Rear
Stay
The configuration of the AC adapter varies according to regional differences in voltage. Please note that the descriptions in this manual are for the 117 V adapter.
Arrange the cord so that the end that plugs into the main unit is extended to the front from under the stay on the stand.
Arm Installation
Loosen the mounting screws.
Rail slider
Arm
8
